Santec is a name you can always rely on when it comes to shower valves. It has got the reliability that you expect from a top-quality shower valve.
Having said that, it still has some issues that you need to go through no matter what you do.
Here, I will be going through some of the common Santec shower valve problems. I will also try to list out the solutions for these problems.
So, if you have santec shower valves or thinking of getting one, this can be very much helpful for you.
Problems You Can Have With Santec Shower Valves
You can face several common problems with Santec shower valves. Here, I will go through the problems and try to provide solutions for them later on.
Let’s get going.
- Not Mixing Water Properly
One of the most common issues you can face with your Santec shower valve is the fact that it doesn’t mix hot and cold water properly.
You may either get completely hot water, or you will get completely cold water. There won’t be a temperature balance, which is a serious issue to face.
Most of the time, this happens when the cartridge has issues. The problem is caused because of a faulty installation of the Santec shower cartridge.
Other than that, the water line can also be responsible for this problem. When a water line runs into the wrong portion of a valve, it usually faces this issue.
- Sudden Temperature Changes
Another problem that you may face with your shower valve is the sudden temperature change. The change can be very slight but still noticeable if you are used to a certain temperature.
And this overtime can increase the difference, and you will surely have major issues.
Now, this problem happens because of limescale buildup on your shower valve. When there is a lot of lime buildup inside your shower valve, you will face this problem.
Sometimes, wear and tear can also cause this problem to happen. So, you may need to figure out what is causing the problem and then go for a fix based on that.
- Misaligned Valve
When you have a misaligned shower valve, you will come across this issue where you can’t even turn the handles properly. In that scenario, even using the shower becomes difficult.
So, if you are facing problems turning your shower handle, it’s high time you check up on your Santec shower valves.
- Leaking Or Dripping Issues
Here is the most annoying and problematic issue you can face with your shower valve. Whenever you see leaking issues on the shower valve, you can immediately assume that the seal on the shower valve is either damaged or worn out.
This is a problem that you can’t ignore one bit. The moment you notice leaks from your shower valve, you instantly need to take action.
Typically, these are the most common issues that you will face with a Santec shower valve. However, you may sometimes face some issues that are specific to your situation.
The ones I discussed here are mostly the common issues you may encounter with your shower valve.
Fixes You Can Try Out For Santec Shower Valve Problems
Now, you can try out for yourself some fixes. However, I highly recommend taking the help of a professional plumber if youdon’tt know anything about plumbing.
Having said that, let’s check out the solutions for the problems with your shower valves.
- Fixing The Shower Valve Not Mixing Cold And Hot Water
When you face this issue, the likely cause of the problem is the faulty installation of the cartridge. In this case, you will need to remove the cartridge from your shower valve and reinstall it properly.
To check on the cartridge, you will first remove the handle. Usually, there is a screw on the handle underneath a cap. Remove the cap and unscrew the handle using a screwdriver.
- Fixing Sudden Temperature Changes
With the sudden temperature changes, the fix you can try out is to clean up the shower valve from any limescale buildup. You can do that by removing the shower valve and using a solution of vinegar and water on it.
This way, you can get rid of the limescale buildup, and the problem gets fixed.
Another cause of these issues is the worn-out shower valve. In that scenario, the only solution you have is to replace the shower valve.
You can contact Santec customer service in that regard if you have gotten the shower valve recently.
- Fixing Misaligned Shower Valve
Whenever you face difficulty in turning the handles on your shower valve, it’s mostly the misalignment of the shower valve that causes this issue.
It’s very easy to fix the issue. You have to remove the shower valve and then install it properly. This should fix the misalignment problem.
- Fixing Leaks From The Valve
This is where you may need to rely on Santec faucet replacement parts for fixing the problem. The main reason for leaks on your shower valve can be a damaged or worn-out seal.
So, you will need to replace the seal with a new one. It’s not that difficult to replace the seals if you already have the replacement parts. You simply remove the shower valve, then remove the damaged seal.
Replace that with the new seal that you can get from Santec or any plumbing hardware store. Reinstall the shower valve, and you are done.
Now, for the replacement or reinstallation processes, I recommend taking professional help rather than doing it yourself. But if you have prior experience with plumbing work, you can do those yourself.
Lastly, spend some time and watch this troubleshooting video.
Conclusion
To sum up, even with the Santec shower valve problems, you won’t have anything to worry about as they are fixable. Also, these aren’t something that always happens, so you can still rely on the quality of Santec.
Having said that, knowing about the problems and the solutions makes life less worrying for you.
