Having a KWC soap dispenser is always a reliable option to have in your sink or kitchen. This way, you can avoid the hassle of having those bottles of soaps around your kitchen and sinks.
While these are very convenient, they also come with some issues.
KWC soap dispenser not working is undoubtedly one of those concerning issues. Here, I will go through some causes for the dispenser not to work and also give you the solution to those problems.
So, without wasting any more time, let’s get going with it.
Reasons Why KWC Soap Dispenser Is Not Working
Well, there are several causes for your soap dispenser not working properly. Some can be specific to your situation, while some issues are pretty general.
Here, I will go through the common issues rather than the specific ones you might have. Let’s get going then –
- The Pump Is Getting Stuck
One reason that can cause your soap dispenser not to work is the pump getting stuck in one place.
You will have issues where it doesn’t retract and gets locked when this happens.
The reason for this is pretty simple, the spring inside the pump can get damaged or break altogether.
Another reason for that may be the feature of keeping it locked when you push it all the way and turn it 90 degrees.
This is just a feature and not a problem, so it’s nothing you should be worried about.
However, if your soap dispenser doesn’t have the locking mechanism, then it’s most likely the broken spring. So, you will need to get that fixed.
- The Dispenser Is Clogged
Sometimes your soap dispenser can get clogged over time. Now, this can happen after months or years of using your soap dispenser.
Every time you use the soap dispenser, some soap residue can stay on the pump, which results in clogging it up, especially when you use soaps that tend to harden pretty easily.
The dispenser can also get clogged with minerals if you live in a hard water area. This is a common issue with hard water area plumbing.
Since you will be filling in the soap dispenser with water along with soap, there is a chance to have it clogged with minerals.
- Copper Corrosion
Many of the times, your soap dispenser may have chunks of copper stuck in it. This blocks the whole dispenser and cuts off any supply of soap from the dispenser.
Because of that, you may face the issue where you find the dispenser not working properly.
This can happen for many reasons. Usually, the water you get from your supplier is responsible for this corrosion.
Now, aside from these issues, there can be some apparent causes for why your soap dispenser isn’t working. For example, if the tube of your soap dispenser comes off short and doesn’t reach the bottom of the container, it will not work.
Another obvious reason is that you ran out of soap.
With these obvious reasons, the solution is also pretty obvious. You just change the tube or pipe of the dispenser with a larger one.
And when you run out of soap, you just fill up the dispenser with more soap. That’s as easy as it gets for the solution.
Solutions For Soap Dispenser Not Working
Luckily, there are several solutions that you can try out when you face your soap dispenser not working properly. These are some easy solutions that you can try yourself at home without any help.
Let’s get through them one by one.
- Clearing Up The Clog
If your soap dispenser isn’t working because of a clog, then the only solution you are left with is to clear up any clog.
While it may sound all technical, it’s fairly simple to clear up the clog from a soap dispenser.
All you have to do is pull out the metal head or the clip on the dispenser. Then, pour some warm water where you would usually put soap in.
Use a thin wire and run it through the end part of the spout on your soap dispenser.
This way, you can easily flush out the debris that is blocking the dispenser from working.
Usually, it takes about 10 to 15 minutes to try out this solution. And you won’t have to go through any troublesome process either.
So, it’s a straightforward solution for anyone to try out.
- Replacing The Soap Dispenser
If you are dealing with a soap dispenser with a stuck pump, you will need to replace the dispenser altogether. There is no alternative to replacing your soap dispenser when you are dealing with a bad pump.
Like, I discussed earlier in the problem section. Usually, the reason for a stuck pump can be a damaged or broken part.
There is no way to repair or fix the broken part of your soap dispenser. So, the only choice you are left with is replacing it with a new one.
You can do the replacement process by yourself, as it’s not that difficult to replace a soap dispenser. You simply remove the bottle and the nuts from the bottom part.
Then, all you have to do is pull out the old dispenser with a new one. Install the nuts back in, and that’s pretty much it for the process.
Typically, these two solutions should be enough to fix your dispenser and get it working back again. All you have to do is to identify whether it’s the stuck pump or you are facing clogs on the dispenser.
Once you figure that out, you can easily get the solution meant for the problem you are facing.
Conclusion
All in all, when you find the KWC soap dispenser not working correctly, you can simply try out the solutions for the different problems. There is nothing to worry about too much since you can fix the issues by yourself most of the time.
And if you are someone who is wondering whether you should get these soap dispensers or not, don’t let these problems stop you. These are some top-quality soap dispensers that you can get for your kitchen and sink without any second thoughts.
