Dealing with Symmons shower valve low water pressure? If the answer is yes, then don’t look further. We have all the possible reasons and fixes for your problem.
So, let’s keep going!
A Symmons pressure-balancing shower valve may be adjusted to limit the maximum ratio of hot water to cold water, preventing your shower from becoming overly hot.
Why Is There Low Water Pressure In Symmons Shower Valve?
A blocked showerhead, a worn-out mixing valve, a closed valve, a leaking pipe, or even a defective water heater can all contribute to low shower pressure.
Don’t worry if you’re feeling overwhelmed; we’re here to help you narrow down and pinpoint the source of your shower problems.
- There’s A Problem With Your Water Supplier
Ask around before you start twisting valves and pounding on pipes. If your neighbors are experiencing the same problems, it’s unlikely that your low water pressure is due to a problem in your home.
Find out if your water supplier is aware of and working on a problem with your water supply by contacting them. You’ll have to wait a while if it’s something that they’re currently working on.
- The Water Meter Valve Is Not Fully Open
The water meter valve is the second valve in your house that controls water intake.
Because this valve is owned by the water company, most people will never have to deal with it directly. Some of them are difficult to get to, particularly those that are underground.
You should call your water provider if you’ve recently had work done on your residence, especially if that’s when you started to notice your low water pressure.
Most likely, the valve was not fully opened after the job was completed, and someone will need to go in and fully open it.
- The Drains Have Blocked
Clogs don’t simply form behind drains, believe it or not. They may build deep within your plumbing, and even a little clog might cause your water pressure to drop.
- You Work Together on Pipelines
It’s never easy to have to tell someone this. Pipelines that serve many homes are known as shared pipelines.
This means that when your neighbor takes a shower or washes their car, your water pressure will be reduced.
This does not imply that you are responsible for their water consumption, but it does imply that your water supply is shared by two or more households.
Consider this: you’ll feel a difference in water pressure when someone runs the dishwasher while you’re washing your hair.
Experimenting with your schedule and modifying your routine may be beneficial. You’ll be able to use your water just fine as long as you can tell when your neighbor isn’t.
If you decide to replace your pipes, do your homework and pick a plumbing business that won’t charge you hidden costs or unreasonable upcharges.
- Your Piping Is Leaking
You already know your pipes are leaking if your basement or foundation is flooded.
However, it only takes a small leak to disrupt your water pressure. Your water supply is being misdirected by the leak, so even if everything else is operating properly, you aren’t getting the full flow.
Troubleshooting Low Pressure Of Symmons Shower Valve
Here are some stuff you can do to increase the water pressure again:
- Clean The Shower Head
Shower heads can get clogged with silt, limescale, and mineral deposits over time.
Even if you have high water pressure throughout your home, the water flow will reduce to a trickle if this happens.
Remove the shower head and remove any debris that has accumulated within. Remove the filter from the shower head and clean it as well.
This may be done using a toothbrush or anything similar.
- Look For A Flow Restrictor
If one is found, just remove it. For instructions, see the user manual that comes with your shower head. Replace the shower head after removing the restrictor to see whether the flow has improved.
- Make Sure The Valve Is Completely Open
If you’ve recently had construction work done or if you’ve recently moved into a new house, make sure the main shut-off valve is fully open.
When plumbers or other professionals turn off the water valve, they sometimes forget to turn it back on when they’re done.
The valve is normally located in your basement or at the point where the mains system enters your property. It’ll most likely feature a red lever.
Make sure it’s fully open, then check your water pressure to see if anything has changed.
Check all of your pipes in your home for leaks and hire a plumber to fix them. Epoxy putty can be used to make temporary repairs.
- Make Sure The Water Heater Is Clean
Another issue with your water heater is that your water tank may have been clogged with silt. It’s also possible that material has clogged the pipes.
Drain and rinse out all of the lines in your water heater. This should clear any debris from the pipes and fix the low hot water pressure issue.
- Open The Shut-Off Valve On The Water Heater
If you have adequate cold water pressure but poor hot water pressure, the source of the problem might be your water heater.
The first step is to make sure the shutoff valve is open. If not, open it, and the problem should be solved.
- Install A Shower Pump Or Something Similar
If you’ve tried everything else and nothing has worked, you’ll need to start considering solutions that are a little more expensive.
Installing a shower pump to increase the pressure is one option. While it is more expensive than a low-pressure shower head, it is still on the lower end of the pricing spectrum.
Unless you have excellent plumbing abilities, you will need to consult a professional about purchasing and installing a shower pump.
- Purchase A Shower Head With A Low-Pressure Setting
If the issue isn’t caused by your plumbing, you can consider purchasing a low-water-pressure shower head for a comparatively modest price.
These are shower heads that are meant to help boost water flow in regions where there is a lack of pressure.
Lastly, watch this video to see what to do to increase washer pressure in any shower head valve.
Final Words
Everything from your shower to your dishes may be ruined by low water pressure. Though Symmons shower valve low water pressure doesn’t happen that much when it happens it really feels irritating.
We understand you and that’s why we tried to go on the root to find the possible reasons and fixes. If you’re fed up with dealing with a stagnant flow, we believe our article has helped you to show the reasons and fixes.
Hi Clyde, I appreciate your suggestions, but none fit so far, the other Symmons tube/shower has good pressure, the sink has good pressure, both Bathrooms and the Kitchen, the valve in question is a New Symmons Tub/Shower is the one with the problem. Is there a manual adjustment on the valve some where ? I checked everything, that was accessible, saw no problems.