Have you ever noticed that the shower head keeps drooping? The most common reason for this is the rubber seals. A drooping shower head could be due to a loose-fitting or faulty hose.
If you want to fix this problem, you should replace them with better ones. The shower head may not be the only thing to blame.
In this article, we explain why your shower head needs maintenance and how you can repair it.
What Can Cause A Drooping Shower Head?
There are many reasons why a drooping shower head could occur. Some of the most common reasons include:
- Shower Head Too Heavy For The Holder
A drooping shower head can be caused by a weighty shower head that is not properly supported. This could be due to a worn or faulty shower head holder.
If the shower head is too heavy, it will cause the shower arm to droop because of the added pressure.
- Loose-Fitting Or Faulty Hose
The rubber seals around the shower head can lose their grip, leading to a drooping shower head. This is usually caused by water leaking from the hose and getting inside the seal.
You can fix this problem by replacing the hose with a better one, or by tightening its connection properly.
- Worn Struts Or Clamps
The supports that hold the shower head in place can become worn and weak over time. This can lead to a drooping shower head, as the supports are not able to support the weight of the shower head.
To fix this problem, you will need to replace or repair the struts and clamps.
- Dirty Or Clogged Water Lines
If the water lines are dirty, the pressure will be too high for the shower head to hold. This can cause it to droop. To fix this problem, you will need to clean out all of the dirt and debris from the waterlines.
Poor installation can also lead to a clogged water line. In this case, you will need professional help to unblock the line.
- Improper Installation
If the shower head was not properly installed, it could droop. This can be due to incorrect measurements or poor workmanship.
In order to prevent a drooping shower head, make sure you have an experienced professional install your new one.
How To Stop Shower Head From Dropping?
If you notice that your shower head is drooping, there are a few things you can do to fix the problem.
- Check For Loose Or Faulty Hose
If the hose is flexible and seems like it could be coming off of its connector, it might be loose.
In this case, you will need to loosen the connection and reattach it properly.
- Replacement May Be Needed
If the arm does not seem to be securely attached to the base, it might need to be replaced. To do this, you will need a Phillips screwdriver and some patience.
- Repair Or Replace Struts
If the shower head is held up by springs or clamps, these could become worn over time and become weak. In this case, you may need to replace the struts in order for the shower head to remain stable.
- Clean And Degrease
Cleaning out all of the debris from the water lines will help to improve flow and reduce pressure. In addition, you may need to degrease them if there is a build-up of soap or mineral deposits.
- Check For Leaks
If there are any signs that water is leaking below the shower head, it may be time to replace it. To do this, you will need to remove the entire shower head and inspect the joints for leaks.
If needed, you can also replace the seals around these joints.
If none of these options seem to work, you may need to have a professional installation done.
Proper Shower Head Maintenance
It’s important to keep your showerhead maintained in order to extend the lifespan of the unit. Here are a few things you can do:
- Be Sure To Clean It Regularly
Showerheads get dirty very easily, so it is best practice to clean them at least once per week. Simply use a mild soap and water mixture and rinse off thoroughly.
- Check For Clogs
If there are any signs of clogs, be sure to address them immediately. This could include using a plunger to clear blockages, or calling in a professional technician.
- Avoid Pooling Water
If water tends to accumulate at the bottom of the showerhead, it may be time for an upgrade.
In this case, you can replace the showerhead with one that has more dispersal abilities (like diverters). This will help to prevent water from piling up and becoming plugged.
- Avoid Over-Pressuring The System
Overloading your showerhead can cause it to malfunction, or even crack. Be sure not to use too much water at once – rather, allow it to flow evenly through the unit.
Frequently Asked Questions (FAQ)
Due to improper installation, worn-out clamps, or being too heavy for the holder, your shower head may keep dropping.
Use your strap wrench to unscrew the shower arm from the pipe. Clear and clean the coat and arm threads. Lastly, screw the shower head back on and tighten it slowly using your hand.
What does the O-ring do in a shower?
Conclusion
So, there could be several reasons why your shower head may be drooping: The rubber seals that keep water in the pipe can lose their elasticity over time.
This causes them to sag, which then causes the pipe to bend eventually leading to the shower head drooping.
Worn struts and clamps can also cause the support structure to become too weak, which then causes the shower head to droop. Dirty water lines or installation that is not properly done can both lead to a clogged water line and a drooping showerhead.
Replacing shower heads is a relatively simple process, but it’s not something you should do on your own. Hope this article helps you out.