Cleaning a toilet is an unwanted but mandatory job that everyone hates to do. The toilet bowl is the main area where a lot of stains and dirt accumulate over time. Making it slippery can reduce the cleaning time.
So, how to make the toilet bowl slippery?
Several methods are available to ensure a non-stick coating on the toilet bowl. But using a spray appears to be a more easy-going and simple solution. Here we will mention how to create a slippery toilet bowl coating.
Let’s dive in!
Step By Step Guide On How To Make Toilet Bowl Non Stick
Why should you create a non-stick surface on the toilet bowl?
It makes the cleaning task easier because the hydrophobic surface doesn’t have any sticky substances.
The most convenient thing is users don’t have to spend anything but one or two dollars.
Let’s see the steps of slippery hydrophobic coating for the toilet bowl.
- Preparation Before Spraying
At first, removing all the water from the toilet bowl is necessary. So, switch off your water valve. Keep flushing the toilet to remove water as much as possible.
Some water might still be there even after flushing the toilet several times. Wear rubber gloves. Grab a few sheets of thick paper towels.
Use these towels to wipe all the remaining water from the toilet bowl. Discard these used paper towels.
Now, get a plunger and utilize it to remove any further water that is coming through the toilet pipe. Do it gently. Otherwise, it will cause spilling issues.
At the last part of the toilet bowl, you have to create a seal so that no water comes out while you are working on the toilet bowl.
You can put a seal on the mouth of the plunger and enter it inside the bottom of the toilet bowl. Finally, create a seal by pushing down and pulling up for several using the plunger.
There might still be some moisture on the hydrophobic surface. You can use a hair drier to get rid of all the moisture from the surface.
If you don’t have any hair drier, wait for several hours and let the moisture evaporate. But make sure no water is coming from the bottom part of the toilet bowl.
- Spray-on Slippery Toilet Coating
Now comes the second part. So, what spray to use to make your toilet bowl slippery?
Various types of sprays are available.
You can use Rust-Oleum NeverWet Spray, which can give an effective result for a longer time.
Spray evenly in all areas. Make sure to shake it well before spraying.
Creating several coats, including the base coat and the topcoat, will be necessary to make the surface perfectly slippery.
Be sure to wait at least 30 minutes after applying each coat. This will ensure perfect drying.
- Finishing The Task
Once the toilet bowl surface is completely dry, you can turn on the water. Let the water fill the toilet bowl.
You can now use it. Check how magical it looks when flushing the waste. Doesn’t the waste quickly go once you flush it? Surely, it does!
This slippery toilet bowl coating will save water since poops will flush themselves within a blink of an eye.
Tips For Making A Toilet Bowl Slippery
So, you have already learned the perfect way of making your toilet bowl non-stick. Now, we will mention some helpful tips, which you can apply to retain the slippery.
- Regularly Use A Toilet Cleaner
Our toilets develop various stains and mineral deposits from poops and other wastes. Regularly using a toilet cleaner can help you remove these unwanted stains.
You can use toilet bowl cleaner like Clorox, which creates a special coating on the toilet bowl surface. This disallows the poops from sticking. They slide over instantly.
Make sure you use them every week as their coating is not long-lasting.
- Practice Cleaning The Toilet Every Day
When you have several family members, the toilet becomes a busy area. Cleaning it every day will be more appreciatable.
The more time you delay cleaning the toilet, the harder debris. Plus, the stain will be tough to remove.
You can even practice cleaning the toilet bowl every time you use the toilet.
Though it appears an unwanted task, house owners don’t need to waste several hours to clean it.
A few seconds of cleaning will be enough between the flushes. This will be a great alternative to the mess of cleaning that takes several hours.
More importantly, the toilet will remain in good condition.
- Use Vinegar and Baking Soda
We use different multi-purpose products in our hoses, and vinegar and baking soda are two of them. You can utilize these ingredients to make your toilet bowl slippery and cleaner.
Make a mixture of these two items. Normally, you will need 16 ounces of baking soda and 8 ounces of vinegar.
Pour it into the toilet bowl. Keep it overnight in this condition. Then flush the toilet in the morning.
This solution effectively removes annoying stains and prevents calcium buildup on the hydrophobic surface.
- Flushing The Toilet Before Using
How many of us flush our toilet before using it?
Very few people do it. This practice makes the toilet bowl surface smoother, allowing the waste to move quickly inside the last part of the toilet bowl.
But your monthly water bill will increase for using a lot of water. Plus, if you don’t clean the toilet regularly, this practice may not be much effective.
- Using A Pumice Stone
A toilet bowl develops yellow stains over time. House owners can utilize a pumice stone to get rid of these stains and mineral deposits.
Don’t worry. They won’t cause any scratches.
Just make sure you avoid excessive pressure. This stone is suitable to use for weekly cleaning.
However, you may need to use the stone several times since one-time cleaning may not be enough to eliminate all yellow stains.
- Use Coca-Cola
Though it may appear a little bit awkward, Coca-Cola can be a practical choice for toilet cleaning. It has a special bleaching agent. Coca-Cola includes carbonic acid, which is effective in removing yellow stains.
First, remove all the extra water from the toilet bowl. Then, pour one bottle of Coca-Cola on the bowl surface. Keep it overnight.
Scrub the surface using a brush. Flush the toilet several times and enjoy having a glossing finish surface. This will prevent waste from sticking to the hydrophobic surface.
- Changing The Toilet
Sometimes, you may have no option but to change the toilet bowl. But you should first try all possible solutions to make the toilet bowl surface slippery.
Buying a toilet will be appropriate if no other options work for you. When purchasing a new toilet, try choosing a high-quality one that has a glossy surface.
It should be less prone to stick poop, so keep yourself safe from hours cleaning it.
Conclusion
Are you still wondering how to make toilet bowl slippery? We have already mentioned all the details to make your toilet bowl non-sticky.
As a bonus, some effective hacks are listed to retain a slippery surface for the toilet bowl.
Ensure you take care of your toilet properly and regularly to ensure a clean and fresh environment inside the bathroom. When you have been using the same toilet for a long time, getting a new one seems a better decision.