Fusion Pro Grout Problems And How To Solve Those Issues?

Did you ever use the Fusion pro grout on your floor or wall tiles? What do you know about it? Fusion Pro grout is a sanded and pre-mixed grout.

It is applicable both inside and outside your home. But, people face Fusion Pro grout problems after using it.

Though it is said that this grout is easy to apply and clean, you will find several problems after using it. What type of problems may you face?

You will know about all the issues and possible solutions in this article.

Problems You May Face With Fusion Pro Grouts

Fusion Pro grout is a new type of grout. That’s why you may not be familiar with this grout.

So, when people use it, they do not know the exact way to apply it and face some issues:

• Improper Mixing

One of the most common mistakes is failing to mix Fusion Pro thoroughly and evenly. The grout contains polymers that must dissolve and distribute throughout the mixture.

Rushing the mixing process or adding too little water leads to weak, inconsistent grout.

Be sure to mix Fusion Pro with cool, clean water at a ratio of approximately 1 lb of powder to 1 pt of water. Use a low-speed power mixer for 3-5 minutes, stopping regularly to scrape down the sides of the bucket. This ensures all powder gets incorporated.

• Inadequate Coverage

Skimping on grout leads to porous, incomplete joints. Make sure to fully pack joints, leaving no gaps or voids. Spread grout diagonally across joints for the smoothest, most complete coverage.

Take care not to allow grout to set partially on large jobs. Work in small, manageable sections of 3-4 ft at a time so you can clean off haze before it dries completely. Rinse tools and sponges frequently as well.

• Improper Curing Conditions

Fusion Pro requires precise conditions as it cures. Ensure the room stays between 50-100°F for 72 hours. Avoid drafts which can dry the surface prematurely. Mist the grout regularly with clean water for best results.

Drastic temperature changes make Fusion Pro vulnerable to cracking or flaking. Don’t force-dry with fans or heaters. Let the grout cure slowly at room temperature away from direct sunlight.

• Grout Haze

The most frustrating problem with Fusion Pro is dealing with a stubborn haze that remains after grouting. This cloudy film clings to tile and resists removal. It stems from improper cleanup during the grout’s short working time.

Grout haze can be minimized with consistent, thorough cleaning. Use sponges and soft scrub pads to wipe diagonally across tiles, rinsing often. Change water frequently to limit haze. Stay ahead of the drying grout, working in small zones.

If haze persists, special cleanup solutions and polishing pads can remove it after a full 72 hour cure. But prevention with careful, timely cleaning is better for aesthetics and efficiency.

• Make Your Floor or Wall so Messy

At the time of applying this Fusion Pro grout, the clean part of the tiles will be so messy.

Even when you try to clean the joining part of the tiles, grout will come up continuously and make your tiles so dirty.

• Pinholes Problem

The pinhole problem is the most remarkable problem of Fusion Pro grout. Suppose you apply this grout between your tiles.

You will find pinholes after drying the grout properly, and you will find where the four tiles are joined.

If you use this grout in your bathroom, water will go through the hole. After some months or years, your floor or wall tiles will be damaged.

Fusion Pro grout is shrunk after drying. When it is shrinking, it creates several holes in the grout.

For covering the pinholes, you will again apply the grout where the holes are visible. After applying this grout, again, you need to clean up the extra grout from the tiles.

You apply this grout to solve the pinhole problem. But, what is happening? After drying the grout, you will notice the same problem again. So, using the Fusion Pro grout is a waste of time and money also.

• Wasting More Time and Money

To coat the pinhole, you need to apply the same grout several times. It will waste your valuable time. For applying the grout, again and again, you also need more grout which is not to get free. Therefore, it is also money wasting.

•  Ruin Your Cloth

When you apply the Fusion Pro grout, your dress may be ruined. You may not be careful about your clothes because you are busy applying this grout. Or you may think that this grout will vanish after a normal wash.

But your idea is wrong. It is not easy to remove the grout from the clothes.

• Time-consuming Cleaning Process

The applying process of the Fusion Pro grout is easy, but after applying it, the cleaning process is complicated. This cleaning process is not the same as the regular grout.

If you apply this Fusion Pro grout on the tiles, it will not take more time to dry. Now you want to clean the extra grout from the tiles.

What will you do?

You need extra pressure to clean it.

When you apply pressure, scrub it with a brush, the main grout between the tiles may come out. So, this is a big problem for Fusion Pro grout applications.

It is a very time-consuming task to clean the white pigment. For cleaning, you need a grout sponge, a bucket with fresh water, and some microfiber cloths. It is not easy to manage all of these components.

Though it is easy to apply, you will be very annoyed to clean up the tiles. The most disgusting part of this cleaning process is to clean the print-like grout from the tiles.

For a fresh cleaning, you need more time. So, be ready before applying this grout.

Possible Solutions of Fusion Grout Problems

Fusion grout is not familiar to all people. That’s why they do not know the exact way of applying it. If you follow the step-by-step rules, hopefully, you will never face these issues.

• Before starting to apply the Fusion grout, take a light wet sponge and wipe the surface of the tiles. Never use more water in the joint between tiles.
• Do not apply this grout on the big area at a time. You need to apply a small space. After using and cleaning this area, you can go for another.
• You should take more than three or four minutes to clean the extra grout after applying. It will not be suitable to dry the tile’s surface grout. Before drying this grout, you should be ready to clean it.
• At the last end of the floating grout, you have to drag the sponge to clean the extra grout. If you take more time to clean it, it will be challenging to clean the tiles properly. You need more pressure to remove. That’s why the grout between tiles may pull out.
• Use a bit of wet sponge and dump the entire area you apply the grout on before a few moments. It will be very helpful to clean the tiles without more pressure.
• While cleaning the extra grout, turn your sponge into a circular movement. Press lightly that the grout comes out but not the grout of the tile joint.
• Never scrub more and apply more pressure on the tiles. Always remember that the tile joint will always remain full with grout.
• Wipe the files, again and again, squeeze the sponge. Clean the sponge and repeat it before the tiles clean properly.
• You can flip the sponge for cleaning. At last, you will get complete grouted tiles. It will be best to apply the grout and clean it on a twenty square feet area. If you take more than that, the grout may be dried.
• For the final cleaning up, you should use a microfiber towel. This towel must be dumped. Drug the towel across the surface of the tiles before cleaning it completely.

Crucial Things to Consider With Fusion Pro Grout

• It is not easy to install the Fusion Pro grout like other types of grout. For a proper installation, it needs evaporation. So, your working area must have adequate airspace.
• Before drying the grout, you should not wrap it.
• For setting tile, you should use a strong mortar.
• This grout does not have a quick emergence rate. It is different from other grouts. So, be careful while applying it.
• You should always keep the joint of the tiles clean. Dirt or water can damage it.
• The Fusion Pro grout is ready to use. You can apply it without mixing anything like water.
• No need to blend the grout well.
• The Fusion grout is not suitable for the shape of irregular tiles like stone mosaic tiles.
• You will find different types of tiles. All varieties may not be favorable for your Fusion grout. So, you have to choose the appropriate tiles.
• You can use a grout sealer before applying the grout to your tiles. If you use this sealer, it will be easy to clean the surface of the tiles.

FAQs

Here are answers to some frequently asked questions about Fusion Pro grout:

Wrapping Up

Therefore, whenever there is a problem, normally, there is a way around fixing it. Do not be worried because the Fusion Pro grout problems are easy to solve. For solving all the issues, you must follow the rules.

Fixing this Fusion Pro grout is more challenging than the other grouts. So, before applying it, you should manage all necessary tools.

If you fail to install this grout on your tiles, you should hire an experienced person.